Re: Binding heavy paper (4 messages) Stephen Clark 15 Jan 1999 14:59 UTC
4 messages 1)--------------- Date: Thu, 14 Jan 1999 16:14:11 -0600 (CST) From: Cindy Morley <cmorley@law.uark.edu> Subject: Re: Binding heavy paper (Angie Piercy) > Our binder has more difficulty with this type of paper than any other, as > the Double-fan adhesive binding does not seem to hold. Is this consistent > with other binders? Is it possible that a different glue would help? Our Yes this is consistent with other binders. I am not a fan of adhesive binding as it seems to breakdown over time (no mater what type of paper is used). We almost always have ours sewn (expecially papers such as the one you are talking about.) P.S. which bindery do you use? We use Heckman and have used American as well. Cindy Morley University of Arkansas Fayetteville Cindy Morley University of Arkansas Law School Library cmorley@law.uark.edu (501) 575-7916 2)------------------- Date: Thu, 14 Jan 1999 16:46:35 -0600 From: "Kevil, L H." <KevilL@MISSOURI.EDU> Subject: Re: Binding heavy paper (Angie Piercy) Our experience is different. We believe that oversewing should be avoided as a general rule. If pages are falling out, it likely is the result of operator error at the bindery or a less than optimum choice of adhesive. Please get in touch if you would like more details. L. Hunter Kevil, Head, Serials Dept, Ellis Library, University of Missouri-Columbia, Columbia, MO 65201 Voice: 573-884-8760 Fax: 573-884-5243 E-mail: KevilL@missouri.edu 3)---------------------- Date: Fri, 15 Jan 1999 06:29:01 -0600 From: Merle Kimball <makimb@JANUS.SWEM.WM.EDU> Subject: Re: Binding heavy paper (Angie Piercy) Angie, We have our bindery double-fan adhesive bind art books but they also cut little notches in the spine so there is more area for the glue to adhere to (Metaknotch). This seems to work quite well though we still have a page come out once in a while. Really thick (over 2 inches) clay-coated volumes have to be oversewn as adhesive binding will not hold. This is done for other clay-coated materials. Our bindery is Mid-Atlantic Book Bindery in Petersburg (formerly Colonial Heights) Virginia. If you have any questions, you are welcome to contact me. Merle Kimball (Ms.) Serials Collection Management & Preservation Librarian Earl Gregg Swem Library College of William & Mary Williamsburg, VA 23187-8794 telephone: 757 221-3103 e-mail: makimb@mail.swem.wm.edu 4)------------------------ Date: Fri, 15 Jan 1999 07:56:28 -0500 (EST) From: Nan_Canington <ncaningt@valdosta.edu> Subject: Re: Binding heavy paper (Angie Piercy) Maybe if you use an electric eraser and buff some of the slick material off of book it would stick to your binding. Nan Canington Valdosta State University Valdosta, Ga. 31698 Phone 912-245-3731 Fax 912-259-5059 email ncaningt@valdosta.edu > ---------- Forwarded message ---------- > Date: Thu, 14 Jan 1999 08:30:31 -0600 > From: Angie Piercy <afp048t@MAIL.SMSU.EDU> > Subject: Binding heavy paper > > I would like to know what experiences Bindery Prep people have had with > slick or heavy, clay-coated type paper when they want a book rebound. We > see this type of paper in art/photography books most frequently. > Our binder has more difficulty with this type of paper than any other, as > the Double-fan adhesive binding does not seem to hold. Is this consistent > with other binders? Is it possible that a different glue would help? Our > binder is beginning to revert to oversewing on these problem books, which, > of course, creates a whole new set of problems. Anyone else experiencing > the same problems? Anyone who isn't having trouble willing to share Binder > information? > Thanks! > > Angie Piercy > Library Associate - Acquisitions > Southwest Missouri State University >